Setting The Alarm - auna Connect Vertical Mode D'emploi

SETTING THE ALARM

1. Press TIMER button on the remote control, the display shows "Alarm (1
or 2): Off [hh:mm]"..
Alternatively,
Press the MENU button on the remote to display the function main menu.
Press / buttons to select Main menu, and then press SELECT button to
 
confirm.
Press / buttons to select Alarms, and then press SELECT button to enter
 
Alarms menu.
2. Press / buttons to select the Alarm number (1 or 2) and then press
 
SELECT button to start the setting of the following parameters.
3. Press / buttons to select then press SELECT button to confirm.
 
Enable Off/ Daily/ Once/ Weekends/ Weekdays
Time (Alarm On time)
Mode Buzzer/ Internet radio/ DAB/ FM/ CD/ USB
Preset Last Listened/ (Preset station)
Volume Muted, 0-32
Save Save and confirm the alarm setting
Finally, select "Save" and press SELECT button to save the alarm setting.
When alarm is set, the alarm icon will appear on the display during standby
mode.
To turn off the alarm when it sounds, press the STANDBY/ON button on
unit, or press or the TIMER button on the remote control.
Cancelling the alarm
1. Press TIMER button on the remote control, the display shows "Alarm (1
or 2): On [hh:mm]".
2. Press / buttons to select the Alarm number (1 or 2) and then press
 
SELECT button to start the setting of the timer.
3. Press / buttons to select "Enable" then press SELECT button to
 
confirm.
4. Press / buttons to select "Off" then press SELECT button to confirm.
 
5. Finally, select "Save" and press SELECT button to save the setting.
EN
73