Setting The Alarm - auna Dreamee Mode D'emploi

EN
32

SETTING THE ALARM

This function allows the system to turn on automatically and wake you up
by buzzer/CD/FM or DAB mode.
1. Set the unit to standby mode and press the Alarm button (4) once.
2. The display will show "Select Alarm (1) 2" and then press the Skip up
/down button (10) to select alarm setting of alarm 1 or 2. To
confirm, press the Alarm button (4) again
3. The display will show "Set Alarm (ON) OFF." Press the Skip up
down button (10) to select "ON" and the press the Alarm button (4)
again to confirm.
4. The hour digit of alarm time will flash, press the Skip up
button(10) to select the alarm time hour, then press the Alarm
button (4) to confirm
5. The minute digit of alarm time will flash, press the Skip up
button (10) to select the alarm time hour, then press the Alarm
button (4) to confirm
6. Alarm type will be shown on display, press Skip up
button (10) to select alarm mode by Buzzer/CD/DAB or FM. Press the
Alarm button (4) to confirm the wake up mode setting.
7. Volume level showed on display, press Skip up
(10) to adjust the wake up volume level, then press the Alarm button (4)
button again to complete the alarm setting.
8. The LCD display will show "AL1" or "AL2" icon and keep in standby
mode.
9. To turn off the alarm, press the Alarm button (4) once, then select alarm
1 or alarm 2 and press the Alarm button (4) again to confirm. Then select
OFF at the "Set Alarm ON (OFF)" and press the Alarm button (4) again
to confirm. Then press the Alarm button (4) until the end of the alarm
setting. The AL will be disappear on the LCD display.
Important Notes
• If the DAB or radio data system (RDS) broadcasting signal received, the
unit will set the actual time automatically.
• Please never set the unit to off mode as alarm will not working in off
mode.
• Please be sure the AC/DC adaptor is connected to the AC outlet and
check the current time was correct before setting alarm function
/
/down
/down
/down
/down button