Alarm - auna iTuner 320 BT Mode D'emploi

ALARM

Setting the Alarm
1. Press the ALARM button on the remote control, the display shows
"Alarm (1 or 2): Off [hh:mm]".
/
2. Press the   buttons to select the Alarm number (1 or 2) and then
press the SELECT button to start thesetting of the following parameters.
For the following setting, press the 
SELECT button to confirm.
Enable Off/ Daily/ Once/ Weekends/ Weekdays
Time (Alarm On time)
Mode Buzzer/ Internet radio/ Spotify/ DAB/ FM
Preset Last Listened/ (Preset station)
Volume Muted, 1-32
Save Save and confirm the alarm setting
Finally, select "Save" and press the SELECT button to save the alarm setting.
When the alarm is set, the alarm icon will appear on the display during
standby mode.
To turn off the alarm when it sounds, press the STANDBY or ALARM button.
During Standby mode, press the ALARM button repeatedly to turn the
saved Alarm on/off.
Cancelling the Alarm
1. Press the ALARM button on the remote control, the display shows
"Alarm (1 or 2): On [hh:mm]".
/
2. Press the   buttons to select the Alarm number (1 or 2) and then
press SELECT to start the setting of the timer.
/
3. Press the   buttons to select "Enable" then press the SELECT button
to confirm.
/
4. Press the   buttons to select "Off" then press the SELECT button to
confirm.
5. Finally, select "Save" and press the SELECT button to save the setting.
If no button is pressed within approx. 15 seconds, the unit exits timer setting
mode automatically.
/
 buttons to select then press the
EN
63