DAB OPERATION
Press MODE on the unit or remote control repeatedly to select DAB
radio. The unit will enter into the DAB mode and perform auto scan
function. During the scan the display will show "Scanning... " together
with a slide bar that indicates the progress of the scan and the amount
of stations that have been found so far. Once the scan has finished,
the unit will select the first alpha numerically found station. To explore
the found stations, press the / buttons on unit or
remote control to select and press the SELECT button on
unit or remote control to confirm.
Station list
1. During DAB mode, press MENU button to access DAB menu.
2. Press
/
buttons to select "Station List" and then press SELECT button
to confirm.
3. A list of DAB stations will show on the display.
Auto Scan
Press SCAN button on unit or remote control to activate auto scan.
Alternatively, press MENU button, and then press
SCAN. Press SELECT button to confirm.
1. The display will show "Scanning..." and a progress slide bar.
2. All the stations that have been found will be stored automatically. To
explore and listen to the found stations, press
and the press SELECT button to confirm..
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This
can help you when aligning your aerial or when adding stations that were
missed while auto tuning.
1. Press MENU on the remote to display the menu.
2. Press 12 / w / 3 / s buttons to select Manual tune, and press SELECT
button to confirm.
3. The display will show the multiplex 5A to 13F.
4. Press 12 / w / 3 / s buttons to select the channel, and press SELECT
button to confirm.
5. Now view the Station List and you will find any new radio stations that
have been manually tuned in.
/
abuttons on
/
buttons to select
/
buttons to select
EN
63