mspa TUSCANY Manuel Du Propriétaire page 14

5. Spa liner assembly
5.1 Take out the Spa Liner, put it inside the spa
Joint Side on the liner stuck out the
"Open-end panel" and go through the open
section on the panel.
5.2 Stretch the top trim of the liner over the
5.2
6. Control box installation
connection point.)
6.1
7. Spa Bladder Inflation
tightly.
b) Open the air valve on the bladder. Insert the inflation
hose into the valve.
c) Start pumping air into the bladder until it is firm to
touch but not hard.
d) Disconnect the inflation hose from the air valve.
5.1
6.2
7
14