User Reference - Festo VISB/SF50 Serie Notice Simplifiee

VISB/SF 50
1

User Reference

The SB/SF 50 control block for valve terminals type 03 is desi-
gned exclusively for the following application:
–
Controlling pneumatic and electric actuators.
–
Scanning electronic sensor signals by means of input
modules.
The limits specified in the technical data must be observed.
See the Pneumatics manual P.BE MIDI/MAXI-... and the
Electronics manual P.BE SB50-03.... for detailed information.
CAUTION
• Switch off the power supply before you connect or discon-
nect the plugs (to avoid functional damage).
PLEASE NOTE
Start up only fully mounted and wired valve terminals.
9706
11