Cleaning Sensors And Wheels; Cleaning Charging Poles; Cleaning Suction Passage And Dust Sensor - Amibot Flex Mode D'emploi

Product Maintenance

Cleaning Sensors and Wheels

Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or tool.

Cleaning Charging Poles

Clean the charging poles, as marked in figure below, with soft cleaning cloth or tool.

Cleaning Suction Passage and Dust Sensor

Take out the suction kit from robot, then clean the suction passage and dust sensor, as marked in figure
below, with soft cleaning cloth or tool.
Note:
Avoid allowing the sensors to get wet.
17