Sensors And Central Signature Brush - Amibot Signature Edition Jungle Mode D'emploi

Maintenance

Sensors and central Signature Brush

Gap and power sensors
The gap and power sensors on the bottom of the robot and on the
home base must be regularly cleaned with a soft cloth. Never let the
sensors get wet.
Central Signature brush
Unclip the
underneath
remove the central Signature
brush. Clean the cavity using a
soft cloth and remove human
and pet hair caught around the
brush. Run under clean water for
optimum cleaning. Wait until it is
fully dry before putting it back.
21
EN
yellow cover
the robot and