Cleaning Sensors And Wheels; Cleaning Charging Poles; Cleaning Suction Passage And Dust Sensor - Amibot Prime Mode D'emploi

Product Maintenance

3. Cleaning Sensors and Wheels

Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or tool.

4. Cleaning Charging Poles

Clean the charging poles, as marked in figure below, with soft cleaning cloth or tool.

5. Cleaning Suction Passage and Dust Sensor

Clean the suction passage and dust sensor, as marked in figure below, with soft cleaning cloth
or tool.
Note:
Please don't let the sensors get wet by water, thinner etc.
14