Cleaning Modes - Amibot Flex Mode D'emploi

Product Operation

Cleaning Modes

1. Auto cleaning
In this mode, the robot will clean a room automatically and
adjust its cleaning behavior based on specific situations.
2. Spot cleaning
In this mode, the robot will center on the starting point, then
rotate externally, which suitable for cleaning in an open
area.
3. Edge cleaning
In this mode, the robot will clean along the wall or the legs
of furniture.
4. Zig-Zag cleaning
The robot will automatically go into Zig-Zag cleaning when
It detected it's in an open area or the environment with less
Obstacles, which will be more efficient and can avoid
repeated cleaning.
Note:
Press MODE button on remote control to select cleaning mode:
A. Mode No. 1111 shows on robot LED display: auto cleaning mode;
B. Mode No. 2222 shows on robot LED display: spiral cleaning mode;
C. Mode No. 3333 shows on robot LED display: edge cleaning mode;
D. Mode No. 4444 shows on robot LED display: Zig-zag cleaning mode.
14