Amibot Flex Mode D'emploi page 17

Product Operation
Water tank and its mopping cloth usage
1. Attach mopping cloth
Stick mopping cloth on the bottom of water tank as shown in fig 1. Make sure the sticking side and
mopping cloth are facing the appropriate sides, and then stick the mopping cloth on its sticking
side.
2. Fill water tank with water
Take out rubber plug of water tank, fill it with water, and then put back the rubber plug tightly on its
position in case of water leakage.
3. Fit water tank on the robot
Turn over the robot, fix the water tank on the robot bottom. Make sure the bolts are firmly pressed
into the fixing slots.
Note:
a. If use water tank kit during cleaning, please check water tank and its mopping cloth are used
according to above instruction. Pay attention to well stick the mopping cloth, avoid friction between
the cloth and robot wheel.
b. Water tank kit can only be used on flat floor without any sharp object.
c. Please don't clean carpet, wooden floor or dry only area by the cleaner with water tank.
15