Maintenance
Obstacle sensors and light sensor
1
Thick microfibre cleaning pads
The thick microfibre cleaning pads are machine washable at 30°
maximum or may be handwashed with clean water and your usual
washing detergent.
NOTE: Accessories need to be replaced in accordance with how frequently the robot
is used and the amount and type of debris that it cleans.
The obstacle detectors (1) on the
side of the robot and the light
detector (2) on the top must be
cleaned regularly to ensure that
the appliance works correctly.
Use a soft cloth or slightly damp
cotton bud, if necessary. Dry
2
the damp area well immediately
after cleaning it.
15
EN