ATE BFCS 300 Mode D'emploi page 35

Changing the fuse
(figures on page XX)
The mains fuse is located at the mains
connection at the back of the device.
WARNING! Risk of death from elec-
tric shock and fire!
Incorrect or bridged fuses can
lead to severe injuries or death
from electric shock or can cause a
device fire.
• Never bridge a micro fuse; never
short-circuit the fuse holder
• Always run the device with fuses of the
type specified
(see Technical data page 30)
1. Switch the device off and disconnect
the power cable from it
2. Push both clips on the fuse holder
inwards and pull out the fuse holder
3. Replace the defective fuse
4. Push the fuse holder in again until you
hear the clips engage
5. Connect the device and switch it on
Manual – BFCS 300
29
English