ATE BFCS 300 Mode D'emploi page 31

Displaying the status of the short-term
counter
The short-term counter documents the
number of measurements carried out.
• Press the "Memory" button until the
indicator lamp flashes
(approx. 3 seconds)
= The number of measurements (since
the last time the short-term counter
was reset) is displayed.
Resetting the short-term counter
(figures on page XV)
1. Switch the device off and wait until all
of the indicator lamps have gone off
(approx. 10 seconds)
2. Press the "Memory" button
3. Press the "Memory" button while
switching on the device and release
the button after 4 seconds
= The short-term counter is reset to
"0". The device is now ready for meas-
urements.
Displaying the status of the long-term
counter (figures on page XV)
The long-term counter documents the
number of all measurements carried out
previously up to 9999.
• Switch the device off and on again
= The number of all measurements
carried out previously is displayed for
5 seconds.
Note: The long-term counter can-
not be reset. If you exceed 9999
measurements, the counter jumps
back to 1.
Manual – BFCS 300
25
English