General Information; Scope Of Delivery; Operating And Display Elements - ATE BFCS 300 Mode D'emploi

Manual – BFCS 300
ATE brake fluid tester BFCS 300
The brake fluid tester measures the boiling point of glycol-based brake fluid according
to the principle of the thermal-boiling method.
As a result, measurements can be carried out regardless of the brake fluid type.
The device heats the brake fluid until it reaches its boiling point and then displays the
temperature identified. The last ten measurement results can be read out and printed
using the printer, which is available as an option.

General information

Read the instructions carefully before use
and retain them for reference. They must
always be available at the device.
• Opening the device voids the warranty

Operating and display elements

Figure number
1
Figure number
2
5
7
Figure number
3
4
6
18
English
Display
Display, 4 characters
Button
"Start" button
"Memory" button
"Print" button
Indicator lamp
Start
Memory
Print

Scope of delivery

• ATE brake fluid tester BFCS 300
• Power cable
• Manual
• 5 pipettes and 5 sample beakers
Function
Start the measuring process
Display saved measurement values
Print the measurement result
Lamp lights up
Device is now ready
for measurements
There is at least one
measurement value
in the memory
Measurement is
complete Meas-
urement value is
available
Lamp flashes
Measurement in pro-
gress
Short-term counter is
read out
Measurement report is
printed