Lenze ECSEE Serie Instructions De Montage page 47

These instructions are valid for ECSEE... power supply modules as of version:
Type
Design
E = Built−in unit IP20
D = Push−through technique (thermal
separation)
C = Cold−plate technique
Rated direct current
012 = 12 A
020 = 20 A
040 = 38.5 A
Fieldbus interface
C = System bus CAN
Voltage class
4 = 400 V/480 V
Technical version
B = Standard
I = For IT systems
Variant
Hardware version
VA or higher
Operating software version
12 or higher
I
Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
0Fig. 0Tab. 0
EDKCSEE040 DE/EN/FR 3.0
ECS E E xxx
l
x 4 x XXX xx xx
47