Speedlink ENCOUNTER Mode D'emploi page 9

Hardware installation and Gamepad configuration:
1. Connect the USB cable of your gamepad to the USB port of your
PC. Windows may ask you to insert the Windows® 98/2000/ME/
XP CD to install the new hardware component.
2. To configure the gamepad, click on Start/Settings/Control panel/
Game controllers. Note that this control panel is called
"Gaming options" under Windows® Me.
3. Select the device driver.
4. Click on Properties. This menu enables you to test and calibrate
all functions, including Dual Vibration.
Turbo function
The Turbo function allows you to set continuous fire to a fire button.
Proceed as follows:
1. Press the Turbo button and simultaneously a firing button.
2. To reset the Turbo function, press the Clear button and
simultaneously the firing button that was assigned continuous fire.
Vibration function
The gamepad has internal motors that only work with games that support
the vibration functions. For information about compatibility, please refer
to the instruction book for the respective game. If vibration still doesn't
work, check whether the vibration function has been activated in the
options menu of the game.
Important information
Make sure your game software supports game controllers. To be able to
use the vibration functions, the game software must support Vibration.
If you notice that some buttons don't work in a game, check the game
configuration again. The button functions can vary from one game to
another. Before configuring the gamepad in the options menu of a game,
first read the game's user guide to avoid making incorrect settings.
Analogue/digital mode
Press „Analog" button to switch between analogue mode (LED on) and
digital mode (LED turned off).
The analogue mode offers 4 axis and twelve buttons.
The digital mode offers two axis and ten buttons.
9
D
GB
F
E
I