Additional Displays - Millipore Milli-Q Guide De L'utilisateur

OPERATING THE MILLI-Q SYSTEM

Additional displays

System maintenance messages
Display
message
EXCH. CARTRIDGES SERVICE LED blinking
The operational lifetime of the purification
/polisher cartridges has expired.
START SANIT. SERVICE LED blinking
A cleaning of the ultrafiltration module is
necessary.
AIR PURGE A 5 minutes air purge of the cartridge(s)
is in progress.
EXCHANGE SERVICE LED blinking
UV LAMP The operational lifetime of the UV lamp of
the Milli-Q has expired.
EXCHANGE SERVICE LED blinking
A10 UV The operational lifetime of the UV lamp
inside the A10 has expired.
A10 SERVICE LED blinking
CLEANING 59
A cleaning cycle of the A10 is in
progress. Duration is 60 minutes.
System status Action
Occurs automatically.
See MAINTENANCE chapter,
page 21 for further information
Occurs automatically.
See MAINTENANCE chapter,
page 22 for further information
Automatic after installation of new
cartridges.
Occurs automatically.
Call Millipore Technical Service
Occurs automatically.
Call Millipore Technical Service
Occurs automatically after
installing new purification /
polisher pack(s).
See the MAINTENANCE chapter,
page 24 for further information.
Milli-Q
Ac Gr Bio Syn A10
15