An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound (power) level (L
WA
Uncertainty for the sound
power level (K
)
WA
Emission sound pressure
level (L
)
pA
Uncertainty for the sound
pressure level (K
)
pA
Total vibration
Vibration emission value when tighten-
ing screws/bolts and nuts of the maxi-
mum permitted size (a
h
Uncertainty for tightening
screws/bolts and nuts of the maximum
permitted size
4.2 Setting the torque
The torque is selected by way of the torque selector button.
Model SID ...
SID 14A
SID 22A
Torque
Setting I
Setting II
Setting III
Model SIW ...
SIW 14A
SIW 22A
Torque
Setting I
Setting II
Setting III
6
English
Printed: 06.06.2017 | Doc-Nr: PUB / 5155097 / 000 / 03
SID 14A
)
94 dB(A)
3 dB(A)
83 dB(A)
3 dB(A)
SID 14A
7.5 m/s²
)
1.5 m/s²
Model
SID 14A
50 Nm
100 Nm
150 Nm
SIW 14A
1/2" square
drive with ball-
notch reten-
tion
80 Nm
120 Nm
185 Nm
SIW 14A
SID 22A
94 dB(A)
97 dB(A)
3 dB(A)
3 dB(A)
83 dB(A)
86 dB(A)
3 dB(A)
3 dB(A)
SIW 14A
SID 22A
7.5 m/s²
11 m/s²
1.5 m/s²
1.5 m/s²
SID 22A
60 Nm
110 Nm
165 Nm
SIW 22A
3/8" square
1/2" square
drive with
drive with ball-
locking ring
notch reten-
tion
65 Nm
90 Nm
115 Nm
135 Nm
160 Nm
200 Nm
SIW 22A
97 dB(A)
3 dB(A)
86 dB(A)
3 dB(A)
SIW 22A
11 m/s²
1.5 m/s²
3/8" square
drive with
locking ring
75 Nm
120 Nm
175 Nm