Symbols On The Product; Product Information; General Power Tool Safety Warnings - Hilti BX 3-BT Notice D'utilisation Originale

Masquer les pouces Voir aussi pour BX 3-BT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.3
Product-dependent symbols
1.3.1

Symbols on the product

The following symbols can be used on the product:
General symbol for "must do"
Wear eye protection
Wear hearing protection
Wear a hard hat
The Bluetooth
wordmark and the
®
tooth SIG, Inc. and Hilti has been granted a license to use these trademarks.
Direct current (DC)
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type:
Generation:
Serial number:
2
Safety
2.1

General power tool safety warnings

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2
English
logo are registered trademarks and the property of Blue-
2209577
BX 3-BT
02
*2209577*

Publicité

Table des Matières
loading

Table des Matières