Intended Use - Hilti SID 14-A Mode D'emploi Original

▶ Make sure that the working area is well ventilated and, where necessary, wear a respirator appropriate
for the type of dust generated. Contact with or inhalation of dust may cause allergic reactions and/or
respiratory or other diseases to the operator or bystanders. Certain kinds of dust, such as oak and beech
dust, are classified as carcinogenic, especially in conjunction with additives for treating wood (chromate,
wood preservative). Materials containing asbestos may only be handled by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before starting work, check the working area for concealed electric cables or gas and water pipes. If
you damage an electric cable accidentally, external metal parts of the power tool may become live and
present a risk of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The power tool may go off course and
veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it down.
2.3 Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not take apart, squash or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not attempt to charge or continue to use damaged batteries.
▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable
location, well away from flammable materials, where it can be kept under observation and left to cool
down. Contact Hilti Service after the battery has cooled down.
3 Description
3.1 Overview of the product
Hex. socket (SID)
@
Illumination
;
Forward/reverse selector switch with safety
=
lock
Control switch (with electronic speed
%
control)

3.2 Intended use

The product described is a hand-held cordless impact screwdriver. It is designed for driving and removing
screws and for tightening and releasing nuts and bolts in wood, metal, masonry and concrete.
▶ For this product use only Hilti Li­ion batteries of the B14 (SID/SIW 14­A) or B22 (SID/SIW 22­A) series,
as applicable.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Charge status display
The charge status of the Li­ion battery is displayed after pressing one of the release buttons lightly (press
only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
4 English
Printed: 06.06.2017 | Doc-Nr: PUB / 5155097 / 000 / 03
1
&
(
)
+
§
/
Meaning
•
•
•
•
•
Square drive (SIW)
Torque selector button
Belt hook (optional)
Battery state-of-charge display
Release buttons (B22/... battery)
Release button (B14/... battery)
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %