Items Supplied - Hilti SID 14-A Mode D'emploi Original

Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.

3.4 Items supplied

Impact screwdriver/wrench, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by us for use with the product can be found at your
local Hilti Center or online at: www.hilti.group
4 Impact screwdriver/wrench
Rated voltage
Weight in accordance with EPTA proce-
dure 01
Rated speed under no
load
Impact speed
Torque adjustment
Large standard bolts
Large high-strength bolts
Socket/bit drive
Rated voltage
Weight in accordance with EPTA proce-
dure 01
Rated speed under no
load
Impact speed
Torque adjustment
Large standard bolts
Large high-strength bolts
Socket/bit drive
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
Printed: 06.06.2017 | Doc-Nr: PUB / 5155097 / 000 / 03
SID 14­A
14.4 V
1.3 kg
Setting I 0 /min ... 1,000 /min
Setting II 0 /min ... 1,500 /min
Setting III 0 /min ... 2,500 /min
≤ 3,100 bpm
3 settings
M8 to M16
M6 to M12
/ " hex. socket with lock-
1
4
ing ring
SID 22­A
21.6 V
1.5 kg
Setting I 0 /min ... 1,000 /min
Setting II 0 /min ... 1,500 /min
Setting III 0 /min ... 2,500 /min
≤ 3,450 bpm
3 settings
M8 to M16
M6 to M12
/ " hex. socket with lock-
1
4
ing ring
SIW 14­A
14.4 V
1.3 kg
0 /min ... 1,000 /min
0 /min ... 1,500 /min
0 /min ... 2,300 /min
≤ 3,400 bpm
3 settings
M8 to M16
M6 to M12
/ " square drive with
1
2
ball-notch retention
or / " square drive with
3
8
locking ring
SIW 22­A
21.6 V
1.5 kg
0 /min ... 1,000 /min
0 /min ... 1,500 /min
0 /min ... 2,300 /min
≤ 3,500 bpm
3 settings
M8 to M16
M6 to M12
/ " square drive with
1
2
ball-notch retention
or / " square drive with
3
8
locking ring
English 5