Intended Use; Items Supplied - Hilti SD 4500-A22 Mode D'emploi

▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before starting work, check the working area for concealed electric cables or gas and water pipes. If
you damage an electric cable accidentally, external metal parts of the power tool may become live and
present a risk of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The power tool may go off course and
veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it down.
3 Description
3.1 Overview of the product
Chuck
@
Power tool / accessory interface (snap-on
;
connection)
Universal hook
=
Motor cooling air intake
%
Grip
&
Motor cooling air intake
(
Forward / reverse selector switch with
)
safety lock

3.2 Intended use

The product described is a hand-held cordless drywall screwdriver equipped with a clutch.
Use only the drywall screws specified in the technical data.
The screwdriver handles best when gripped in the in-line position.
The motor cooling air is drawn in through the cooling air slots and blown out of the screwdriver through the
air vents.
▶ Use only Hilti Li­ion batteries from the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series with these batteries.
3.3 Charge state display
The charge state of the Li­ion battery is displayed after pressing one of the release buttons lightly (press only
until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Note
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.

3.4 Items supplied

Drywall screwdriver, operating instructions
Note
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.com.
4
Printed: 11.08.2016 | Doc-Nr: PUB / 5295856 / 000 / 00
1
+
§
/
:
∙
$
Meaning
•
•
•
•
•
Control switch (with electronic speed
control)
Lockbutton for continuous operation
Belt hook
Charge state and fault display (Li-ion
battery)
Battery release buttons
Depth gauge
Charge state: 75 % to 100 %
Charge state: 50 % to 75 %
Charge state: 25 % to 50 %
Charge state: 10 % to 25 %
Charge state: < 10 %