Intended Use - Hilti GDG 6-A22 Mode D'emploi Original

3 Description
3.1 Overview of the product
3.2

Intended use

The product described is a die grinder. It is designed for working on metal. It is designed for grinding and
abrasive cutting, for wire brushing, for polishing and for routing.
Use only accessory tools with a shank diameter appropriate for the collet mounted on the product. Comply
with the information in the technical data.
The product is suitable for dry use only, without water for cooling.
• Use only Hilti lithium­ion batteries of the B 22 series with this product.
• Use only Hilti-approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group
3.3 Items supplied
Die grinder, 2 wrenches, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Li-ion battery charge status display
The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED flashes.
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs flash, please refer to the information given in the
Troubleshooting section.
*2276759*
1
@
;
=
%
&
(
)
+
§
/
:
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
2276759
Clamping nut with collet
Spindle
Neck / front grip
Lockable on/off switch
Grip
Adjusting knob for speed
Battery
Battery release button
Dust filter
Small wrench, 12 mm
Large wrench, 17 mm
English 7