Intended Use - Hilti HDE 500-A22 Mode D'emploi

▶ Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
▶ Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
2.4 Battery use and care
▶ Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
3 Description
3.1 Overview 1
3.2

Intended use

The dispenser is designed to dispense the contents of Hilti foil packs and cartridges in a controlled operation.
The HDE 500­A22 cordless dispenser is designed exclusively for use with Hilti 330 ml or 500 ml foil packs
and 580 ml cartridges.
The dispenser can be used with either a foil pack holder or a cartridge:
▶ Black foil pack holder: Used to dispense Hilti mortars supplied in black or white foil packs.
▶ Red foil pack holder: Used to dispense Hilti mortars supplied in red foil packs.
▶ Cartridge: For use with Hilti mortar systems without a foil pack holder.
▶ Use this product only with Hilti Li­ion batteries of the B18 / B22 series.
▶ Use only Hilti battery chargers of the C4/36 series for these batteries.
4 English
Front locating lug for installation of the foil
@
pack holder / cartridge
Cradle for the foil pack holder / cartridge
;
Rear locating lug for installation of the foil
=
pack holder / cartridge
Dispensing mode selector switch
%
Parallel piston rods with grip
&
Release button
(
Grip
)
Battery release buttons (also used to activate
+
the charge status indicator)
Battery
§
Trigger
/
Accessories
Foil pack
:
Foil pack holder, black
∙
Foil pack holder, red
$
Cartridge
£
2017693
*2017693*