ESAB MobileFeed 301 AVS Manuel D'instructions page 17

5 OPERATION
CAUTION!
Before threading the wire, make sure that the chisel point and burrs have been
removed from the end of the wire to prevent the wire from jamming in the torch
liner.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
Risk of crushing when replacing the wire bobbin! Do not use safety gloves when
inserting the welding wire between the feed rollers.
WARNING!
Do not operate the feeder with the enclosure open.
0558 012 633 - 17 - © ESAB AB 2015