Brandt DVDP-10R Manuel D'instructions page 5

Incorporated Battery
The battery type used in the unit is one lithium battery pack. The battery
is in cooperated and is not readily accessible.
The battery must be disposed of at your local recycling point.
Installing Remote Control Battery
Push and pull
from the remote control and insert one 3V CR2025
lithium battery in the battery holder with the print
face up, then replace the battery holder.
WARNING:
To save power: switch off mains power or pull out the power adapter
plug when you are not using the apparatus.
Never operate the apparatus and try to view video while driving a vehicle.
Class 1 laser product
This product contains a low power laser device. Invisible laser
radiation when the enclosure is opened and interlocks are
defeated.
Avoid exposure to beam.
This digital video disc player employs a laser system. Use of controls,
adjustments, or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not open the enclosure.
Never stare directly into the laser beam.
to slide out the battery holder
EN-4