Brandt DVDP-10R Manuel D'instructions page 9

1.
2. / /
3.
4. SETUP
5. SOURCE
Earphones: Insert standard 3.5 mm earphones into the earphone
socket. The speakers will be muted.
EARPHONE VOLUME WARNING
Connect earphones with volume
set low and increase it if required.
Prolonged listening through some
earphones at high volume settings
can result in hearing damage.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
/
EN-8
6. USB port
7. Earphone socket
8. AV OUT jack
9. ON/OFF switch
10. DC IN 9 12V jack
r Connect to the AC power
adapter or car adapter.
Earphones or headphones must
comply with EN50332 1 /
EN50332 2 to ensure continued
protection from excessive sound
pressure.