Cleaning And Maintenance; Troubleshooting - Brandt DVDP-10R Manuel D'instructions

CLEANING AND MAINTENANCE

Cleaning the unit
To clean the player, use a
dirty, use a cloth lightly moistened with a mild detergent solu on.
Do not use strong solvents such as alcohol, benzine or thinner, as these
might damage the surface of the unit.
Maintaining the unit
The DVD player is a high-tech, precision device. If the
lens and disc drive parts are dirty or worn, the picture quality could be
diminished. Depending on the
and maintenance are recommended
hours of use.

TROUBLESHOOTING

Problem
No sound or
distorted sound.
Picture is distorted.
Remote control
does not work.
, dry cloth. If the surfaces are extremely
environment, regular
Adjust the volume.
Make sure that earphones are not plugged
in. When earphones are plugged in, the
internal speakers are turned o
Make sure that all cables are inserted
correctly into the appropriate jacks.
During fast-forwarding or fast-reversing,
di on is normal.
The DVD may be damaged. Try another one.
Make sure that the
Make sure that nothing is blocking the IR
sensor.
Make sure that you point the remote directly
at the IR sensor.
EN-23
pick-up
er every 1,000
ery is fresh.