Getting Started; Onnecting Audio /Video Cable - Brandt DVDP-10R Manuel D'instructions

GETTING STARTED

to AC Power
Plug one end of the power adapter into the DC IN 9 12V jack on the
side of your player, and the other end into the mains socket.
!
When you unplug the adapter, always pull the plug from the mains
socket. Never pull the cord.
to a car
1. Plug one end of the car adapter into the DC IN 9 12V jack on the
side of your player.
2. Plug the other end of the adapter into a car
3. Turn on your player.
Connecting Audio/Video Cable
1. Connect the single connector end of the supplied audio/video cable
to the AV OUT jack of the unit.
2. Connect the triple connector end of the supplied audio/video cable
to the corresponding jacks of the TV display.
NOTE: Match the colour of the AV cable with the jacks of TV display.
The yellow cable is for the yellow video jack, the red/white
cable is for the red/white audio jacks.
t e Incorporated
The DVD player has an incorporated
connect the supplied power adapter cable to the DC IN 9 12V jack. The
red charge indicator light will be illuminated. When the
charged, the red charge indicator light will
turn green.
NOTE: It will take approximately 4 hours to fully charge the b
socket
of e DVD
ry, to charge the b
EN-11
lighter socket.
r
,
is fully
.