Brandt DVDP-10R Manuel D'instructions page 21

Audio Setup
Screen Saver – This func on is used to turn the screen
save on or o .
Auto Standby – This func on is used to select auto
standby se ng if there is no opera on within 3 or 4
hours.
DOWNMIX – The func on allows you to set the stereo
analog output of your DVD player.
LT/RT: To select this op on if your DVD
player is connected to a Dolby Pro Logic
decoder.
STEREO: To select this op on when output
delivers sound from only the two front
speakers.
DOLBY DIGITAL – This func on is used for the se ng
of dual mono and dynamic range compression.
Dual Mono
STEREO: Le mono sound will send output signals to
the le speaker and right mono sound will send output
signals to the right speaker.
L-MONO: Le mono sound will send output signals
to the le and right speakers.
R-MONO: Right mono sound will send output signals
to the le and right speakers.
MIX-MONO: Le and right mixed mono sound will
send output signals to the le and right speakers.
Dynamic
Dynamic range compression
EN-20