Safety Information; Preparation - Allen + Roth LWSGSS Mode D'emploi

HARDWARE CONTENTS (not shown actual size)
AA BB
Cam bolt
Cam lock
(not shown to (not shown to
actual size) actual size)
Qty. 44 Qty. 44
FF
EE
M5 x 65 mm
M4 x 38 mm
Screw
Screw
Qty. 2
Qty. 4
CC
Wood dowel 1/4" x 30 mm
Qty. 22 Qty. 4
GG HH
Hex wrench Tipping restraint
hardware
Qty. 1
Qty. 1
3

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
DD
the product.
1. Do not allow children to climb or play in or around this product.
2. Use this unit for its intended purpose only. Do not use shelves as step ladder.
3. To avoid damage, assemble the product on a sturdy, level and protective surface.
4. Two or more persons must work together to install the unit onto the wall.
5. Make sure all bolts/screws are tightly fastened before the unit is used.
Bolt
6. Check bolts/screws periodically and tighten them if necessary.
WARNING
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE
WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY. DISTRIBUTE WEIGHT EVENLY.
WARNING
Young children can be killed when furniture tips over. Place heavy items on lower shelves. You
must use anchors to secure furniture to wall. Make sure that all objects are removed before
moving the assembled unit. The unit must be team lifted, not dragged or pushed. Failure to do
so could cause instability, product collapse, and/or serious injury.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 50 minutes
Tools Required for Assembly (not included): Phillips screwdriver, rubber mallet, stud finder, pencil,
tape measure, power drill and drill bits.
MAXIMUM LOAD: 20 lb.
FOR EACH SHELF
(EVENLY DISTRIBUTED)
4