Package Contents; Safety Information; Preparation - Allen + Roth Vanity LWS30HWV Instructions De Montage

PACKAGE CONTENTS

C
A
B
E
D
HARDWARE CONTENTS (not shown actual size)
AA BB
Lag Bolt Large Flat Washer
(not included) (not included)
x 6+1 extra x 6+1 extra

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or install the product.
WARNING
Do not stand on vanity. Use vanity on level ground. Base
vanity supports a maximum weight of 200 lbs. Exceeding
maximum weight limit will compromise the integrity of the
vanity structure and could cause the vanity to fail.
CAUTION
Do not hang from the vanity.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes
Tools Required (not included): Silicone compound.
PART DESCRIPTION
A Vanity Top (preassembled)
B Vanity Base
C Backsplash
D Vanity Feet
E Wall Hanging Cleat
CC DD EE
5/16 x 2-1/4 in. Bolt Lock Washer Small Flat Washer
x 8+1 extra x 8+1 extra x 8+1 extra
Maximum load 200 lb. (90.71 kg)
Maximum load 30 lb. (13.6 kg)
Maximum load 30 lb. (13.6 kg)
2
ASSEMBLY INSTRUCTIONS
Water Supply Lines and Drain Installation Guide
QUANTITY
1. Mark wall for vanity placement and note the location of the water
1
supply lines and drain on the back panel of vanity.
1
1
4
1
FF
2. Move vanity (B) into proper place against the wall.
Hex Wrench
x 1
3. Install faucet, drain and supply lines (none included) to vanity top (A)
according to the instructions supplied with those items.
1
2
B
3
3
A