Safety Information; Preparation - Allen + Roth LWS0944A Mode D'emploi

HARDWARE CONTENTS (shown actual size)
AA BB
Green
Ground
Wire
Screw
Connector
[preassembled
to Crossbar (A)]
Qty. 3
Qty. 1

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit
breaker box or the main fuse box.
RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
For your safety, read instructions completely before beginning installation.
If in doubt about electrical installation, consult a licensed electrician.
Turn off electricity to fixture before replacing the bulb(s).

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 30 - 45 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers,
Wire cutters, Electrical tape, Safety goggles and Ladder.
Helpful Tools (not included): Wire strippers
CC DD
Outlet
Box
Mounting
Screw
Screw
Qty. 2
Qty. 2
3
EE FF
Hex Nut Mounting
Ball
Qty. 2
Qty. 2
Lowes.com/allenandroth