Troubleshooting - Clarity XLC3.5HS Guide D'utilisation

XLC3.5HS/B
The unit will not operate/no dial tone:
• Verify the AC Adapter is securely plugged into AC outlet, the
base and the telephone.
• Make sure the battery has been placed in the battery
compartment correctly. (The circular metal contacts on battery
need to touch the metal springs inside battery compartment.)
• Make sure the handset battery is fully charged.
• Verify the telephone is in the correct dialing mode: tone (touch)
or pulse (rotary).
• Make sure you are in the usable range of the base station.
The phone does not ring when you receive a call:
• Make sure the RINGER switch on the handset is set to ON.
• Verify the AC Adapter is securely plugged into the AC outlet
and the base.
• Verify the telephone line cord is securely plugged into the
wall jack and the telephone.
• Make sure you are within the usable range of the base station.
• You may have too many extensions on your line. Try unplugging
a few devices.
Noise, interference or other calls heard while using the
handset:
• Make sure you are within the usable range of the base station.
• Make sure the handset battery is fully charged.
• Try relocating the base unit to another location.
• Make sure the AC Adapter is not plugged into the wall outlet
with other appliances.
Phone will not hold charge:
• Make sure the charging contacts on the handset and base
are free of dust and dirt. While unplugged, clean the contacts
with a soft cloth.
• Make sure CHARGE LED (light) on the base is lit when the
handset is in the cradle.

TROUBLESHOOTING

E
N
G
L
I
S
H
11