Clarity XLC3.5HS Guide D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

XLC3.5HS/B
Handset
Needs
Registration
Hold Base
FIND Key
For 5 Secs
Registering...
Registration
Successful
Register
Auto Talk
Voice Asst
Register
Register
Deregister
Register
Register
Deregister
HANDSET 1
Deregistered
OPERATING INSTRUCTIONS
REGISTERING THE XLC3.5HS/HSB
The XLC3.5HS/HSB is compatible with select Clarity
products with ClarityLogic (see page 13 for compatible
products). In order to use the XLC3.5HS/HSB, you must
register it to a main unit.
Pull the handset's battery tab located on the bottom of
the device, and then press MENU to start registering or
deregistering your handset from your system.
TO REGISTER AN UNREGISTERED HANDSET
1. Press MENU to enter registration mode. You will see
displayed on the screen, "Handset Needs Registra-
tion."
2. Press and hold the FIND key on the main unit's base
for five seconds, until the base visual ringer starts
flashing. Release FIND key on the main unit's base.
3. Press MENU key on the handset.
4. The screen shows "Registering... ", then "Registration
Successful" (accompanied by five quick beeps).
5. Your handset is now registered to your main system.
Your screen will display "Handset X," (where "X" is
the number of the actual handset registered, such as
the second or fourth handset, etc.).
You can extend the number of handsets by using
additional XLC3.5HS/HSB handsets (sold separately) - up
to 4 handsets (total) can be registered to a main system.
TO REGISTER YOUR HANDSET AGAIN (or to
register to a different main system)
1. In standby mode, press MENU.
2. Press DOWN arrow five times to advance the row
reading "Phone Setup" to the top of the screen.
3. Press MENU to enter the setup section. The screen
displays "Register" on the screen's top row now.
4. Press MENU to enter the Registration section.
5. Press MENU again to select "Register."
6. Follow the Registration steps listed above.
TO DEREGISTER THE HANDSET
1. See the six steps listed above, then press MENU to
select "Deregister."
2. Your handset will deregister from your base
as soon as you press MENU. The screen will
show "Handset X Deregistered"(again, where "X" is
the number of the handset registered), then "Handset
Needs Registration."
E
N
G
L
I
S
H
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xlc3.5hsb

Table des Matières