Troubleshooting - Clarity Professional C4210 Mode D'emploi

TROUBLESHOOTING

Noise, Static, Interference or Other Calls
Heard while Using the Handset:
•
•
•
•
•
•
Phone Will Not Hold Charge:
•
•
•
38
Try changing channels.
Make sure the base antenna is in an
upright position.
Make sure you are in the usable range of the
base station.
Make sure the handset battery is fully charged.
Try relocating the base unit to another location.
Make sure the AC Adapter is not plugged into
the wall outlet with other appliances.
Make sure the charging contacts on the
handset and base are free of dust and dirt.
Clean the contacts with a soft cloth.
Make sure CHARGE LED on the base is lit
when handset is in the cradle.
If necessary, replace the handset battery. (See
Handset Battery Charging)
TROUBLESHOOTING
Difficulty in Placing or Receiving Calls:
• Move closer to the base and try again.
• If moving closer does not work, you may have
lost the security code.
•
Reset code by placing the handset back on
the base for 5-10 seconds. (See Security
Code Section)
• Make sure you have selected the correct
dialing mode, tone or pulse.
• Make sure the AC Adapter is not plugged into
a wall outlet with other appliances. Discon-
nect for 5-10 seconds then reconnect. Place
the handset back on the base and reinsert the
AC Adapter.
• Make sure the handset battery is fully charged.
39