Printer; Device Information; System Tones - Xylem TITRONIC 500 Mode D'emploi

148
5.6

Printer

For connecting printers (Fig. 143) please refer to  8.3 Printers.
Fig. 143
5.7

Device Information

This point contains information about the device (Fig. 144).
Fig. 144
5.8

System Tones

This is the point to set the volume of the system sounds and the front keyboard of the device (Fig. 145).
The system sounds become audible e.g. at the end of the titration or in case of an erroneous operation.
The keys of the front keyboard produce a clicking sound if the key was used successfully.
Fig. 145
No sounds will occur when the external keyboard is used.