Xylem TITRONIC 500 Mode D'emploi page 109

109
Fig. 39
The balance data can be entered using the front keyboard or an external keyboard.
The input is to be confirmed with <ENTER>/<OK>.
In the case of an automatic acceptance of the balance data, the weighed-in quantities will be read in from a
memory. If the memory does not contain any balance data, a message will appear (Fig. 40).
Fig. 40
Pressing the Print key will transfer the balance data, too.
Titration will then begin directly after the transfer of the balance data without any further confirmation being
necessary.
Following the input of the sample description and/or the weight/volume the display changes (Fig. 41).
Fig. 41