Snap-On EEWH306A Instructions page 23

EEWH306A Tire Changer Operation Manual
I. Check the automatic air lubricator oil level weekly.
When adding oil to the lubricator, disconnect the air
supply first, remove the fill screw 'A', and add oil as
needed. Make sure seals are in place when replacing
the cap.
Fig.7.0-3
NOTICE!
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON SUGGESTED
LUBRICANTS.
Suggested oils for the filter/lubricator unit:
TAMOIL: WHITE MINERAL OIL 15
SHELL: ONDINA OIL 15
BP: ENERGOL WT 3
TOTAL: LOBELIA SB 15
ESSO: MARCOL 82
Operation Manual
553
®
Page 23