Controls - Snap-On EEWH306A Instructions

EEWH306A Tire Changer Operation Manual
3.0

CONTROLS

Figure 3.0-1
Before operating the machine, take the time to familiarize
yourself with the operation and function of all the controls.
A Press down and release the first pedal (1) from the
left: the jaws of the turntable will retract. Do it again:
the jaws will expand. If you press the pedal prior to
the end of the stroke and release, the jaws may be
stopped in any position.
B Open the bead breaker arm. Press down and hold
the second pedal (2) from the left: by doing this you
operate the bead breaker blade and the arm will
move towards the machine. Release the pedal: the
bead breaker blade will retract.
Operation Manual
WARNING!
WATCH YOUR FINGERS AND LEGS!
C Press down the first pedal (3) from the right: the
turntable turns clockwise. Placing your foot under
the pedal
counterclockwise.
D Lower the Lock Lever (4 ) to unlock the vertical slide,
lift the Lock Lever to lock.
E Turn Swing Arm Adjustment Knob (5) for positioning
mount/demount head slightly away from rim diameter
F Press bead-seater pedal on left side of the machine
(6 ) half way down: air will come out from inflation
hose end.
G Press bead-seater pedal (6) all the way down swiftly
to get air blast from the inflator jets in the clamping
927a
jaws. Air simultaneously comes out of inflator hose.
ATTENTION!
WHEN OPERATING THE BEAD SEATER IT IS
MANDATO RY TO WEAR SAFETY GLASSES TO
PROTECT EYES.
442 441
and lift, the turntable
®
turns
Page 15