Mounting Tubeless Tires - Snap-On EEWH306A Instructions

®
H. Repeat the process for removing the lower bead.
This time, lift the bead opposite to the mount/demount
head to keep it in the drop center (Fig. 4.1-7).
Move the swing arm aside and remove the tire.
ú}:
Fig. 4.1-7

4.2 MOUNTING TUBELESS TIRES

A. Clean entire rim surface (Fig. 4.2-1).
Fig. 4.2-1
Page 18
EEWH306A Tire Changer Operation Manual
Liberally lubricate both beads of the tire with approved
tire lubricant (Fig. 4.2-2).
335
Fig. 4.2-2
NOTICE!
THESE LUBRICATION
NECESSARY TO MOUNT THE TIRE CORRECTLY AND
GET A PROPER CENTERING ON THE RIM. BE SURE
YOU ARE USING APPROVED LUBRICANT ONLY.
336
DANGER!! Keep hands
and fingers clear of
mount/demount head
during operation.
NOTICE!
SOME TIRES HAVE A COLOR DOT THAT IS TO BE
KEPT ON THE OUTSIDE OF THE WHEEL AND IS TO
BE ALIGNED WITH THE VALVE STEM. IF THIS IS THE
CASE BE SURE TO ATTAIN PROPER ALIGNMENT
PRIOR TO TIRE INFLATION.
337
OPERATIONS ARE
441
Operation Manual