Food Processor; (I) Disassembly From Packaged Condition; Disassembly & Assembly - Panasonic MK-F800 Instructions De Fonctionnement

FOOD PROCESSOR

Disassembly from Packaged Condition
1


Rotate the Bowl Lid anticlockwise and lift up from the
Bowl.
Note:
Beware of the sharp edges of the Knife Blade when removing it from the Bowl.
Assembly of Food Processor Attachments
It is highly recommended to clean all attachments and accessories and dry well before using the appliance for the
first time, refer to page GB28 and GB29 for the cleaning method. Unplug when assembling the unit. Before plugging
in, ensure that the Power Switch is switched off. Please refer to page GB29 under 'Storing' on how to re-position the
Motor Housing.
Knife Blade · Kneading Blade · Whipping Blade · Grating Blade
1
Place the Knife Blade (Kneading Blade or Whipping
Blade or Grating Blade) into the Bowl.
Note:
For the Knife Blade, ensure that the Drive
Shaft is protruding from the Knife Blade
after insertion.
100_160419_MK-F800_Second_EU(UZ50E153).indb
-DISASSEMBLY & ASSEMBLY-
or
or
or
11
2
Top of the
Knife Blade
Hold the top of the Knife Blade and lift up to remove
from Bowl.
2


Put the ingredients into the Bowl.
Note:
For the Grating Blade, place the ingredients on top of
the blade and spread them out evenly.
Place the Bowl Lid on top of the Bowl and turn it
clockwise until a 'click' sound is heard. Insert the Food
Pusher into the Feeding Tube.


GB11
2016/04/19 16:56:45