Electrical Requirement - Panasonic MK-F800 Instructions De Fonctionnement

Electrical Requirement

(For UK market only)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and
convenience. A 13-amp fuse is fitted in this plug. Should the fuse need to be replaced
please ensure that the replacement fuse has a rating of 13-amp and that it is approved by
ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse. If the plug
contains a removable fuse cover, you must ensure that it is refitted when the fuse is
replaced. If you lose the fuse cover, the plug must not be used until a replacement cover
is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse
should be removed and the plug cut off and disposed of safety.
There is a danger of severe electrical shock if the cut off plug is inserted into any 13-amp
socket.
How to replace the fuse
Figure A Figure B
The location of the fuse differs according to the
Fuse cover
type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
Open the fuse cover with a screwdriver and
replace the fuse and close or attach the fuse cover.
GB7
100_160419_MK-F800_Second_EU(UZ50E153).indb 7 2016/04/19 16:56:44