Panasonic MK-F800 Instructions De Fonctionnement page 32

Error Mode Indication
Circuit Breaker Protection, High Voltage Detection and High Current Detection
i) Circuit Breaker Protection
No L.E.D.s light up.
Action:
For scenario i) and iii), turn off the Power Switch at the side of Motor Housing, reduce the amount of ingredients
into half and resume operation. If it still does not start, turn off the Power Switch again at the side of Motor Housing
and resume operation.
For scenario ii), the Error Mode Indication is shown due to exceed voltage rating. Use 220-240 V.
Motor Overheat
Alternate blinking of Mince and Intermittent
L.E.D.s.
Action:
Turn off the Power Switch, and let the appliance to
cool down (approx. 30 min). Reduce the amount of
ingredients into half and resume operation.
Electronic component malfunction
Alternate blinking of Mince or Chop or Frozen and Continuous L.E.D.s.
Action:
Please contact your nearest service center for repairing.
GB32
100_160419_MK-F800_Second_EU(UZ50E153).indb
ii) High Voltage Detection
Alternate blinking of Chop and
Intermittent L.E.D.s.
or
32
iii) High Current Detection
Alternate blinking of Mince+Chop
and Continuous+Intermittent
L.E.D.s.
The Bowl, Blender Unit or Dry Mill Unit is not
properly locked onto the Motor Housing.
Alternate blinking of Mince+Chop+Frozen
and Paste+Drainer+Continuous L.E.D.s.
Action:
Reattach the part onto the Motor Housing in proper
position. (Refer to page GB10).
or
2016/04/19 16:56:53