Panasonic MK-F800 Instructions De Fonctionnement page 27

DRY MILL
Operating with Manual Menu
1

After completing the assembly steps, plug-in the plug
into the socket and turn on the Power Switch. The Mode
Indication L.E.D.s will light up and blink.
3 3
During the driving operation, the Stop/Start Indication
L.E.D. will remain lit. Push the Stop/Start Switch to stop
the driving operation.
Note:
• While removing the ingredients, be careful of the Cutting Blade.
• Do not operate exceeding the rated operation duration (1 min ON, 2 min OFF).
100_160419_MK-F800_Second_EU(UZ50E153).indb

27
2
Select the Continuous mode and adjust the speed with
the Rotary Dial. The more bars are lighted, the higher
the speed. Push the Stop/Start Switch to start the
operation.
4


After the processing is completed, switch off the Power
Switch and unplug from the socket. Remove the Dry Mill
Unit from the Motor Housing and proceed to remove the
ingredients.


GB27
2016/04/19 16:56:51