Safety Lock; Circuit Breaker And Temperature Sensor Protection - Panasonic MK-F800 Instructions De Fonctionnement

SAFETY LOCK

The Safety Pin is designed to prevent the appliance from switching on when
- The Bowl Lid or Citrus Strainer and the Bowl are not fully locked to each other.
- The Bowl, Blender Jug or Dry Mill are not fully locked to the Motor Housing.
Note:
• Do not push the Safety Pin and Safety Lever with any instrument, stick etc.
• Do not pour liquids or ingredient at the Safety Pin and Safety Lever area.
• Keep the Safety Pin and Safety Lever area clean to avoid foreign particles accumulate on the area.
Actions above will ensure the Safety Pin and Safety Lever function properly. If not followed, it will
damage the parts related to the Safety Pin and Safety Lever.

CIRCUIT BREAKER AND TEMPERATURE SENSOR PROTECTION

This appliance has the Circuit Breaker and Temperature sensor functions to stop the motor when motor is
overloaded.
(refer to page GB32)
GB10
100_160419_MK-F800_Second_EU(UZ50E153).indb
Safety Pins
10
The Safety Lever only
activates the Safety Pin if the
Bowl Lid or Citrus Strainer is
secured on the Bowl.
Position A : Unlock
Position B : Lock


Fully locking steps:
For Bowl and Blender Jug, align the
triangle mark with the Motor Housing as
shown in position . Turn it clockwise
until a 'click' sound is heard and the
triangular mark now aligns to position .
For Dry Mill, place onto Motor Housing
and turn clockwise until a 'click' sound is
heard. To unlock, follow the locking steps
in reverse.
2016/04/19 16:56:45