Publicité
II.
OVEN TYPE DESCRIPTION
Wiring
Check type and voltage on nameplate.
Type 10B (non-thermostat) ovens
input, providing a 300°F average stabilized load tempera-
ture.
Type 10BTH ovens utilize a tamperproof sealed thermostat,
providing a 275°F average stabilized load temperature.
Type 10BTL ovens utilize a tamperproof sealed thermostat,
providing a 155°F average stabilized load temperature.
Type 10BVT ovens utilize an adjustable thermostat located
inside the base. The thermostat is preset at the factory to
provide a 275°F average stabilized load temperature.
Note: All current 10B ovens rated at 120 volts have a Model
1 designation, 240 volt ovens have Model 2 designation.
Grounding
1. The 120 volt ovens have a three blade plug cap with
grounding prong (NEMA 5-15P) attached to a 10 foot power
supply cord. When used with a grounded receptacle, these
ovens meet all local electrical code requirements and are
U.L. Listed.
2. The 240 volt ovens have a 10 foot power supply cord.
When used with a grounding plug cap and a grounded
receptacle, these ovens meet all local code requirements.
Electrode Storage
Type 10 series ovens are not airtight and electrodes stored
within will start absorbing ambient moisture as soon as the
utilize constant heat
oven cools. We recommend removal of electrodes at shift
end and storage of same consumables in suitable larger
holding ovens until reissued.
These ovens are not to be used for rebaking or recondition-
ing contaminated electrodes. They are designed to accept
electrodes in 100% useable condition and to maintain that
condition until consumed at the job site. For optimum stabi-
lization, oven should be hot when loaded and kept "on line"
as long as electrodes are being stored.
Guide to Storage
In the absence of detailed storage information from your
electrode manufacturer, the "Revised Guide To Electrode
Storage" (available from Phoenix International, Inc.) may be
used as an indication of approximate temperatures. For
Specific information involving critical operations be sure to
contact your electrode manufacturer for complete informa-
tion.
Repair - Spare Parts
Enclosed with these instructions are wiring diagrams and a
repair parts list for your oven. For critical welding operations
requiring continuous holding we would suggest carrying all
of the parts listed in the "Suggested Spare Parts Section" of
these instructions.
N5486200G-3
Publicité
