Settings For First Ignition; The Ignition - LA NORDICA LNK15 Manuel Utilisateur

basic combustion air settings
Before igniting the boiler, it is necessary to ensure the ceramic stone is
positioned correctly in the lower combustion chamber. Any residual ashes
must be removed.
The ceramic stones must be placed as shown in the figure and pushed against
the back.
Excessive ash residues prevent a complete thermal exchange between the
smoke and the water, thus reducing performance.

sETTINgs for fIrsT IgNITIoN

Once the power supply cable is connected, turn the POWER switch on the digital display to position ( I ).
Proceed with IGNITION, as described below.

THE IgNITIoN

TEMP. TEMP. READ
25°C
WATER Temp.
THE IgNITIoN MENU
TEMP. READ SET. TEMP.
xxx °C 80° - 85°C
OFF
54
SECONDARY air controller
always leave it 50% open
It is possible to visually check the flame from a glass
peephole.
Never block the upper peephole.
TEMP. SMOKE
20°C
SMOKE
IGNITION ON
 BOILER
MENU
x 3sec TEMPERATURE
 PUFFER
TEMPERATURE

 BOILER
TEMPERATURE
 PUFFER
TEMPERATURE

 PUFFER
TEMPERATURE
 SMOKE
TEMPERATURE
MENU
 SMOKE
TEMPERATURE
% SMOKE MOTOR OPERATION
0 %
AIR
FLASHING
FLASHING
FLASHING
ENgLIsH