Pride Mobility Zolar Manuel De L'utilisateur page 30

I I I . B AT T E R I E S A N D C H A R G I N G
1. Secure the batteries in the battery wells by routing the provided battery straps through the battery well slots
as shown.
2. Ensure the short strap runs over the top of the long strap.
NOTE: Before securing both straps, ensure the D-ring is positioned as shown here. The D-ring should be
positioned within 1 inch (2.54 cm) of, but never touch, the battery well.
3. Any excess strapping should be placed facing the back, or next to the seat post, of the scooter.
WARNING! The battery straps should never be positioned under the battery.
Figure 17. Battery Securement for Models 614 and 714
30
Battery Securement and Strap Routing
IDENTIFICATION KEY
1. REUSABLE FASTENER
2. SHORT STRAP
3. LONG STRAP
4. D-RING
2
3
7
8
5. FRONT SLOT
6. SIDE SLOT
7. REAR SLOT
8. BATTERY SPACERS
1
6
5
4
Full-size Scooter Series